+
  • IMG_3300.png
  • IMG_3302.png
  • 2发16收1(1792484368371).png
  • 2发16收2(1792484213896).png

3UVPX 2-transmit, 16-receive RFSOC digital signal acquisition and processing module

The ZYNQ chip in the IW-49DR_3UVPX is based on XILINX’s Zynq™ UltraScale+™ RFSoC Gen3 series, model XCZU49DR‑2FFVG1760E. It offers access to a large FPGA gate density, 16 ADC/DAC ports, expandable I/O, and DDR4 memory, making it suitable for a wide range of programmable applications. The IW-49DR_3UVPX, equipped with the ZU49DR FPGA, is supported by 16 14‑bit ADCs operating at a sampling rate of 2.5 GSPS and two 14‑bit DACs with a sampling rate of 9.85 GSPS.

Model: IW-49DR_3UVPX

Category:

Zynq UltraScale+ RFSOC Development Board

Keywords:


Telephone

Hotline:

  • Product Details
  • Product Specifications
  • Product Features and Applications
  • Shipping List
    • Commodity name: 3UVPX 2-transmit, 16-receive RFSOC digital signal acquisition and processing module
    • 型号: IW-49DR_3UVPX

    The ZYNQ chip in the IW-49DR_3UVPX is based on XILINX’s Zynq™ UltraScale+™ RFSoC Gen3 series, model XCZU49DR‑2FFVG1760E. It offers access to a large FPGA gate density, 16 ADC/DAC ports, expandable I/O, and DDR4 memory, making it suitable for a wide range of programmable applications. The IW-49DR_3UVPX, equipped with the ZU49DR FPGA, is supported by 16 14‑bit ADCs operating at a sampling rate of 2.5 GSPS and two 14‑bit DACs with a sampling rate of 9.85 GSPS.

    The ZYNQ chip in the IW-49DR_3UVPX is based on XILINX’s Zynq™ UltraScale+™ RFSoC Gen3 series, model XCZU49DR‑2FFVG1760E. It offers access to a large FPGA gate density, 16 ADC/DAC channels, expandable I/O ports, and DDR4 memory, making it suitable for a wide range of programmable applications. The IW-49DR_3UVPX, equipped with the ZU49DR FPGA, is supported by 16 14‑bit ADCs operating at a sampling rate of 2.5 GSPS and two 14‑bit DACs with a sampling rate of 9.85 GSPS.
    IW-49DR_3UVPX utilizes eight Micron MT40A512M16LY‑083E IT:E DDR4 chips, with four DDR4 chips mounted on the PS side to form a 64-bit data bus width and another four on the PL side, also constituting a 64-bit data bus. The DDR4 memory operates at a maximum data rate of 2400 Mb/s, making it suitable for high-performance data processing and storage. Equipped with an onboard 3UVPX connector, IW-49DR_3UVPX supports multiple communication protocols, ensuring performance, compatibility, and reliability. It can efficiently handle high-speed data in parallel with analog-to-digital conversion, while the PS side features one QSPI interface, one JTAG/UART interface, and a 10/100/1000 Ethernet port.

    The IW-49DR_3UVPX board features 14 ADC and 2 DAC ports, and is powered by a ZU49DR FPGA. It supports 16 14-bit ADCs with a sampling rate of 2.5 GSPS and 2 14-bit DACs with a sampling rate of 9.85 GSPS. The ADC and DAC ports utilize high‑performance RF SMA‑KHDC16 connectors.

                                                       

  •  

    FPGA chip

    ● Zynq UltraScale+ XCZU49DR-2FFVF1760

    RF interface

    ● X16ADC (14-bit, 2.5 GSPS) ports

    ● X2DAC (14-bit, 9.85 GSPS) ports

    Memory

    ● PS 4xDDR4(4GB,64bit)

    ● PL 4xDDR4(4GB,64bit)

    Public interface

    ● VPX

    ● 1x USB port

     

    PS-side interface

    ● 1x JTAG interface (JTAG 6-pin header reserved)

    PL-side interface

    ● 1×FMC interface (with adapter for 8-channel ADC ports)

    ● 8-channel ADC (14-bit, 5 GSPS) port

    ● 2-channel DAC (14-bit, 9.85 GSPS) port

    Ambient temperature requirements

    ● Operating temperature: -40°C to 70°C

    Board power supply

    ● The power supply interface uses a 12V power input.

     

  • Product Features

     

    • Maximize input/output channel density
    • Support 16 road 14-bit RF ADC ,2 road 14-bit RF-DAC , providing comprehensive RF Signal chain, maximizing input / Output channel density, high bandwidth, heterogeneous processing capabilities, and low power consumption enable simultaneous operation of all… 16 One channel and multiple boards to meet the requirements of larger system applications.
    • Reduce the complexity of the RF signal chain
    • Radar with multiple channels and EW The system faces cost and complexity challenges, as more channels translate into higher costs and larger sizes. RF On the signal / Downconversion and signal conditioning. A common solution is to directly RF Sampling -  A more flexible approach than traditional analog frequency conversion and filtering. Direct RF Sampling can be implemented in the digital domain, consuming less power and typically at a lower cost. This means that RF The front end can handle a wider bandwidth than traditional analog techniques while consuming less power. And with… RFSoC As with other components, employing very high sampling rates in data converters allows most analog filtering and conditioning to be performed close to the antenna, resulting in a simpler and more flexible front end than in the past. By implementing… ADC and DAC Integrated into the device, it eliminates the need for JESD204B the demand for -  It simplifies design complexity and helps reduce latency.
    • Heterogeneous processing capability
    • For example, both radar and electronic warfare systems require units equipped with FPGA of streaming DSP and general-purpose processors used for decision-making and control. In the past, these processing tasks were handled by separate modules; now, with the help of IW-49DR_3UVPX It can be achieved by leveraging RFSoC Technology integrates these two functions into a single module. This is particularly well-suited for today’s smart radars. / The ever-growing demand for electronic warfare technologies. In addition, with… RF The simplified integration of the sampling device eliminates JESD204B The complexity of high-speed serial interfaces. This means that even basic functions such as inter-device communication consume fewer programmable logic resources, thereby enabling application-specific… IP There are more computing resources available than in the past.

    Application scenarios

     

    Communication application scenarios:

     

     

    5G and LTE Wireless technology: via Zynq RFSoC , wireless infrastructure manufacturers can achieve significant reductions in board space and power consumption, which is beneficial for later stages MIMO Technological development is of paramount importance.

    Satellite communication: Designers can by in Zynq UltraScale+ RFSoC Use directly in Chinese RF Sampling, high flexibility, reconfigurable logic, and software programmability enable the development of high‑speed, multifunctional instruments for signal generation and signal analysis.

     

     

     

     

    Radar application scenarios:

     

     

     

     

    Radar signal processing and data links: featuring 16 Channel ADC and 2 Channel DAC , which can meet broader application requirements and enable low-latency transmission and reception in early-warning scenarios, achieving optimal response times.

     

     

     

     

     

     

    Test and Measurement Application Scenarios:

     

     

     

     

     

    Designers can by in Zynq UltraScale+ RFSoC Utilization in China RF Sampling, high flexibility, reconfigurable logic, and software programmability enable the development of high‑speed, multifunctional instruments for signal generation and signal analysis.

     

Document Download

Product Inquiry


Product Name:

Submit

*Note: Please ensure all information is accurate and keep your contact details up to date—we’ll reach out to you as soon as possible.