+
  • IW-RFSOC4TR-VU9P.jpg
  • IW-RFSOC4TR-VU9P(3).jpg
  • IW-RFSOC4TR-VU9P(2).jpg

4-channel RFSOC+VU9P digital signal acquisition and processing module

The BiRui Electronics IW‑RFZU47‑VU9P mixed‑signal processing card leverages the Xilinx ZYNQ UltraScale+ RFSoC ZU47DR and Virtex UltraScale+ XCVU9P, offering access to a large FPGA gate count, eight ADC/DAC ports, expandable I/O, and DDR4 memory—making it suitable for a wide range of programmable applications. The IW‑RFSOCZU47DR‑VU9P, equipped with the ZU47DR FPGA, is supported by eight 14‑bit ADCs operating at a 5.0 GSPS sampling rate and eight 14‑bit DACs running at 9.85 GSPS. Both the ADC and DAC ports are connected via high‑performance miniature RF connectors. Onboard, the IW‑RFZU47‑VU9P delivers a comprehensive RF signal chain, meeting the demands of high‑performance RF applications such as wireless‑based machine learning, fiber‑optic systems, massive MIMO remote radio units, millimeter‑wave backhaul, 5G baseband processing, fixed wireless access, wired Remote‑PHY nodes, test and measurement, and satellite communications.

Model:

Category:

Zynq UltraScale+ RFSOC Development Board

Keywords:


Telephone

Hotline:

  • Product Details
  • Product Specifications
  • Product Features and Applications
  • Shipping List
    • Commodity name: 4-channel RFSOC+VU9P digital signal acquisition and processing module

    The BiRui Electronics IW‑RFZU47‑VU9P mixed‑signal processing card leverages the Xilinx ZYNQ UltraScale+ RFSoC ZU47DR and Virtex UltraScale+ XCVU9P, offering access to a large FPGA gate count, eight ADC/DAC ports, expandable I/O, and DDR4 memory—making it suitable for a wide range of programmable applications. The IW‑RFSOCZU47DR‑VU9P, equipped with the ZU47DR FPGA, is supported by eight 14‑bit ADCs operating at a 5.0 GSPS sampling rate and eight 14‑bit DACs running at 9.85 GSPS. Both the ADC and DAC ports are connected via high‑performance miniature RF connectors. Onboard, the IW‑RFZU47‑VU9P delivers a comprehensive RF signal chain, meeting the demands of high‑performance RF applications such as wireless‑based machine learning, fiber‑optic systems, massive MIMO remote radio units, millimeter‑wave backhaul, 5G baseband processing, fixed wireless access, wired Remote‑PHY nodes, test and measurement, and satellite communications.

    The BiRui Electronics IW‑RFZU47‑VU9P mixed‑signal processing card leverages the Xilinx ZYNQ UltraScale+ RFSoC ZU47DR and Virtex UltraScale+ XCVU9P, offering access to a large FPGA gate count, eight ADC/DAC ports, expandable I/O, and DDR4 memory—making it suitable for a wide range of programmable applications. The IW‑RFSOCZU47DR‑VU9P variant, equipped with the ZU47DR FPGA, is supported by eight 14‑bit ADCs operating at a 5.0 GSPS sampling rate and eight 14‑bit DACs running at 9.85 GSPS. Both ADC and DAC channels are connected via high‑performance miniature RF connectors. Onboard, the IW‑RFZU47‑VU9P delivers a comprehensive RF signal chain, addressing demanding RF applications such as wireless‑based machine learning, fiber‑optic systems, massive MIMO remote radio units, millimeter‑wave backhaul, 5G baseband processing, fixed wireless access, wired Remote‑PHY nodes, test and measurement, and satellite communications.

  • Performance Metrics

    FPGA chip

    ● Zynq UltraScale+ XCZU47DR-2FFVG1517I RFSoC

    ● XCVU9P-2FLGB2104I

    RF interface

    ● X4ADC (14-bit, 5 GSPS) ports

    ● X4DAC (14-bit, 9.85 GSPS) ports

    Memory

    ● 47DR: PS 4xDDR4 (4GB, 64-bit, 3200 MT/s)

    ● PL 4xDDR4(4GB,64bit, 3200MT/s)

    ● 9P: 4X DDR4 (4 GB, 64-bit, 3200 MT/s)

    Interface rate

    9P: Supports optical modules (1 unit)

    SFP optical port

    ● 9P: Supports 2 SFP ports

    Board power supply

    ● ATX power supply connector (DC +12V)

    VU9P interface

    ● 1XQSPI Flash (256 MB, 4-bit) with a pre‑configured firmware image

    ● 1 x 10/100/1000 Ethernet RGMII (RJ45) network port

    ● 1XJTAG debugging interface

    47DR-PL end interface

    ● 2x SFP optical ports

    ● 1XRS422 serial port

    ● GPIO expansion interface

    47DR-PS terminal interface

    ● 2x QSPI flash (512 MB, 8-bit) for storing configuration files

    ● 1x 10/100/1000 Ethernet RGMII (RJ45) network port

    ● 1x USB_JTAG/UART debugging interface

    ● 1x JTAG debugging interface

    ● 1x Micro SD Card

  • Serial number

    Product Name

    Product model

    Quantity

    Accessories

    Quantity

    Unit

    Note

    1

    4-channel RFSOC+VU9P digital signal acquisition and processing module  

    IW-RFSOC-VU9P 

    1

    Development board

    1

    pieces

     

    Cooling fan

    2

    pieces

    Installed

    SD card

    1

    pieces

     

    SMA cable

    4

    pieces

     

    Ethernet cable

    1

    pieces

     

    Type-C cable

    1

    pieces

     

    Power adapter cable

    1

    pieces

     

    Power adapter + power cable

    2

    pieces

     

    Data USB drive

    1

    portion

     

Document Download

Product Inquiry


Product Name:

Submit

*Note: Please ensure all information is accurate and keep your contact details up to date—we’ll reach out to you as soon as possible.